Filter
Top Products
10
13. Attach the Seat (15) to the Seat Frame (6) with
four M6 x 16mm Screws (72).
13
15
72
72
6
12. Wet the inside of the two Large Foam Pads (24)
and the Dip Arm (5) with soapy water. Slide the
two Large Foam Pads onto the Dip Arm.
Slide a Dip Arm Cap (65) onto a Dip Handle (11).
Attach the Dip Handle and the Dip Arm Cap to
the Dip Arm (5) with an M10 x 80mm Button
Screw (77) and an M10 Washer (91).
Attach the other Dip Handle (11) and Dip Arm
Cap (65) to the Dip Arm (5) in the same manner.
12
24
24
5
65
11
77
91
11. Grease an M10 x 217mm Bolt (73). Attach the Dip
Arm (5) to the Upright (3) with the Bolt and an M10
N
ylon Locknut (74). D
o not overtighten the
Locknut; the Dip Arm must be able to pivot
e
asily.
Attach the Pin (58) to the Upright (3) with an M4 x
20mm Self-tapping Screw (94). Insert the Pin into
the Upright.
74
94
58
Grease
5
73
3
1
1