Filter
Top Products
Assemblyrequirestwopersons.SetthetreadmHUinaclearedareaandremoveaHpackingmatedaUs.Donot
disposeof the packingmaterialsuntil assemMyis completed.
Note:TheundersideofthetreadmHUwaUkingbeUtiscoatedwithhigh-performanceUubdcant.Duringshipping,a
smallamountofDbdcantmaybetransferredtothetopofthewaUkingbeUtortheshippingcarton.Thisisa normaU
conditionanddoesnotaffecttreadmHUperformance.UfthereisUubdcantontopofthewaUMngbeUt,simpUywipeoff
theUubricantwithasoftclothanda mild,non-abrasivecleaner.
Assemblyrequirestheincludedallenwrench andyourown Phillipsscrewdriver__. For
helpidentifyingtheassemblyhardware,seethehardwaredrawingsbelow.
ConsoleBolt(110)-4 HandrailBolt(90)-4
FrameBolt(31)-4
_¢71"VN¢zlvlv_C,,,lvt
Upright Bolt (113)-4 _
3/4" Tek Screw Panel Screw
(91)-4 (101)-3
Washer (116)-4
Star Washer
(114)-4
1. Raise the end of the Frame (not shown) until the tread°
mill can be moved on the Front Wheels (66), and care°
fully roll the treadmill off the wood pallet.
Insert the Wire Harness (108) through the Upright Plate
(115).
With the help of a second person, hold the Upright (111)
and the Upright Plate (115) against the Frame Cover
(52). See the inset drawing and make sure that the
Upright and the Upright Plate are oriented as
shown. Attach the Upright and the Upright Plate with
four Upright Bolts (113) with two Star Washers (114).
Do not tighten the Upright Botts yet.
111_
52
115
66
114
111
1O8
114
113
6