Filter
Top Products
6
1.
With the help of another person, place two foam
inserts from the packing material under the rear
of the Frame (1) so that the Frame is lifted off
the floor. Have another person hold the ellip-
tical exerciser to prevent it from moving
from side to side until this step is com-
pleted.
Attach the Rear Stabilizer (3) to the Frame (1)
with four 5/16" x 2 1/2" Button Screws (88).
Then, remove the foam inserts and lower the
Rear Stabilizer.
1
2. With the help of another person, place two foam
inserts from the packing material under the
Frame (1) so that the Frame is lifted off the
floor. Have another person hold the elliptical
exerciser to prevent it from moving from
side to side until this step is completed.
Attach the Front Stabilizer (2) to the Frame (1)
with four 5/16" x 2 1/2" Button Screws (88).
Then, remove the foam inserts and lower the
Front Stabilizer.
2
88
88
2
1
88
88
3
1
To make assembly easier, read the
information on page 5 before you begin
assembling the elliptical exerciser.