Filter
Top Products
9
10. Attach an M6 x 10mm Screw (60) to the Seat
P
ost (11). Next, slide the Seat Carriage (19) onto the
Seat Post. Then, adjust the Seat Carriage to the
d
esired position and tighten the Seat Knob (31) into
the Seat Carriage.
See the inset drawing. Attach another M6 x 10mm
S
crew (60) to the Seat Post (11).
60
19
1
1
60
11
31
1
0
11. Identify the Left Pedal (40), which is marked with a
sticker. Using an adjustable wrench,
firmly tighten
the Left Pedal
counterclockwise
into the Left Crank
Arm (15). Tighten the Right Pedal (not shown)
clockwise
into the Right Crank Arm. Important:
Tighten both Pedals as firmly as possible. After
using the exercise cycle for one week, retighten
the Pedals. For best performance, keep the
Pedals tightened.
Press the tab on the side of the Left Pedal (40) and
adjust a Pedal Strap (25) to the desired position.
Adjust the other Pedal Strap (not shown) in the
same way.
12. Make sure that all parts are properly tightened before you use the exercise cycle. Note: Some hard-
ware may be left over after assembly is completed. Place a mat under the exercise cycle to protect the
floor or carpet.
15
25
Tab
40
11