Filter
Top Products
15
HOW TO USE A HEART RATE PROGRAM
1
. Press any button on the console or begin ped-
aling to turn on the console.
See step 1 on page 12.
2. Select a heart rate program.
To select one of the heart rate programs, press
the Heart Rate Programs button repeatedly until
the words HEART RATE 1 or HEART RATE 2
appear in the display.
3. Enter a target heart rate setting.
A few seconds after you select a heart rate pro-
gram, the words ENTER HEART RATE will
appear in the display and the number 110 will
begin to flash.
During heart rate program 1, the same target
heart rate setting will be programmed for all seg-
ments of the program. If you have selected heart
rate program 1, press the increase and decrease
buttons below the Odometer button to enter the
desired target heart rate setting (see EXERCISE
INTENSITY on page 18).
During heart rate program 2, different target
heart rate settings will be programmed for different
segments of the program. If you have selected
heart rate program 2, press the increase and
decrease buttons below the Odometer button to
enter the desired maximum target heart rate set-
ting for the program (see EXERCISE INTENSITY
on page 18).
4. Hold the handgrip pulse sensor.
It is not necessary to hold the handgrip pulse sen-
sor continuously during heart rate programs; how-
ever
, you should hold the handgrip pulse sensor
frequently for the programs to operate properly
.
Each time you hold the handgrip pulse sensor,
keep your hands on the metal contacts for at
least 30 seconds.
5. Begin pedaling to start the program.
Heart rate program 1 is divided into 40 one-
minute segments. Note: For a shorter workout,
stop exercising or select a different program
before the program ends.
Heart rate program 2 is divided into 30 one-
minute segments. One target heart rate setting is
p
rogrammed for each segment. Note: The same
target heart rate setting may be programmed for
c
onsecutive segments.
During the program, the program profile in the dis-
play will show your progress. The flashing column
of the profile represents the current segment of
the program. The height of the flashing column
indicates the target heart rate setting for the cur-
rent segment. At the end of each segment of the
program, a series of tones will sound and the next
segment of the profile will begin to flash.
During both programs, the console will regularly
compare your heart rate to the target heart rate
setting for the current segment of the program. If
your heart rate is too far below or above the target
heart rate setting, the resistance of the pedals will
automatically increase or decrease to bring your
heart rate closer to the target heart rate setting.
Each time the resistance changes, the resistance
setting will appear in the display for a few seconds
to alert you.
While you exercise, you will be prompted to main-
tain a constant pedaling pace. If an upward-point-
ing arrow appears in the display (see the drawing
above), increase your pace. If a downward-point
-
ing arrow appears, decrease your pace. When no
arrow appears, maintain your current pace.
If the resistance setting for the current
segment
is
too high or too low, you can manually override the
setting by pressing the OneTouch Resistance but-
tons. However
,
when the console compares your
heart rate to the target heart rate setting, the
resistance of the pedals may automatically
increase or decrease to bring your heart rate clos
-
er to the target heart rate setting.
Profile
Arrow