Filter
Top Products
9
5. With the help of a second person, tip tread-
mill so that the Base (80) is at on the
ground.
Identify the Left and Right Base Covers (73,
74), which are marked “L” and “R.” Slide the Left
and Right Base Covers onto the Left and Right
Uprights (75, 76) as shown.
74
76
75
70
73
80
5
6. Identify the Left Handrail (71), which is marked
“Left.” If there is a wire in the Left Handrail, re-
move and discard it.
Hold the Left Handrail (71) near the Left Upright
(75). Insert the wire tie on the Upright Wire (70)
through the bottom and out of the end of the Left
Handrail as shown. Then, pull the Upright Wire
through the Left Handrail.
Attach the Left Handrail (71) to the Left Upright
(75) with two 3/8" x 3 1/2" Screws (9) and two
3/8" Star Washers (5). Make sure not to pinch
the Upright Wire (70). Start both Screws, but
do not tighten them yet.
9
5
71
75
Wire
Tie
70
6