Filter
Top Products
GameCycle User’s Guide 2005
Three Rivers
Page 7-14
7 TROUBLESHOOTING
Problem Solution
GameCycle LCD screen is blank but lit up • Remove the Controller Plug from the
GameCube controller socket on the
GameCube (Figure 3.7), turn off the
GameCycle power by unplugging the
GameCycle AC Adapter from the back of
the right support arm as shown in Figure
3.6, turn the GameCycle power back on by
plugging the GameCycle AC Adapter back
in, once the GameCycle power is back on,
insert the Controller Plug back into the
GameCube controller socket on the
GameCube.
Steering does not seem to work correctly • Calibrate the GameCycle using the
instructions in section 6 entitled
GameCycle Calibration.
TV Blank • Turn on the LCD TV by pushing the power
button on top of the LCD TV. The LCD TV
has to be turned on separately from the
GameCube and GameCycle.
• See the “Troubleshooting” section in the
GameCube Instruction Booklet.
TV has blue screen • Press the “SOURCE” button on top of the
LCD TV until in AV1 or AV2 mode. This
will depend on where the AV connections
are made on the back of the LCD TV.
• See the “Troubleshooting” section in the
GameCube Instruction Booklet.