Filter
Top Products
GameCycle User’s Guide 2005
Three Rivers
Page 6-13
6 GAMECYCLE CALIBRATION
To calibrate the GameCycle:
1. Push the
button until you see the button
on the right side of the GameCycle LCD (Figure 6.1)
2. Push the
button
3. Follow the instructions on the GameCycle LCD (Figure
6.2).
Figure 6.1: The button used to start the
calibration process.
a. Turn the crank arms forward at the rate that
you want to be max forward speed.
Stop
turning and push the
button.
b. Turn the crank arms backward at the rate that
you want to be max reverse speed.
Stop
turning and push the
button.
c. First tilt the crank arms as far to the left as the
user can, then tilt the crank arms as far to the
right as the user can. Push the
button.
d. Let the crank arms center by letting go and
pushing the
button.
Note: The GameCycle can be calibrated to fit a
particular user’s ability to turn and steer the GameCycle
crank arms by turning the crank arms faster or slower
and by tilting to the left and right to different degrees
during calibrations. For example, if you are only able to
turn the crank arms at a slow pace, then on the first
calibration screen, turn the crank arms slowly.
Figure 6.2: The calibrations screens.