Filter
Top Products
__________________________________________
20
Distance between NVS-33 line of sight and daytime
riflescope line of sight must not exceed 2 mm. In case of
two different rails are used, the angle deviation between
two rails must not exceed 2 degrees.
Picatinny rail adapter is attached to the scope permanently
by means of a small clamp and screw. The other side of
the adapter is equipped with quick release clamp, which
can be adjusted for width and pressing exertion. It allows
almost immediate installation and de-installation of the
sight on the rifle.
Light suppressor is used to prevent the user disclosure by
greenish light emitted by the working NVS-33. It is
attached on to the night sight instead of mounting
adapters. The size of the light suppressor is determined by
the riflescope design. The night sight should be mounted
on the Picatinny rail as close to the riflescope as possible.