Newcon Optik NVS-33 Binoculars User Manual


 
__________________________________________
13
The night vision attachment NVS-33 is ready for use.
NVS-33 can be screwed directly into the Newcon 3-
12x50 riflescope. Its design allows such mounting
without any additional adapters. To attach NVS-33 in
front of NC 3-12x50, proceed as described above
without using threaded adapters.
Due to different designs of the daytime riflescopes we
cannot guarantee that threaded connection is supported
in all cases. This design may be not strong enough to
hold the night vision attachment during shooting. In
such case, the ring and objective thread of the daytime
scope may be damaged.
The manufacturer is not responsible for use of NVS-33
night sight attachment by a threaded connection on
the scope models other than those, which were
approved by Newcon Optik.
There is no need to re-zero daytime scope or perform any
additional adjustment when NVS-33 is installed on the
rifle.