Filter
Top Products
__________________________________________
17
The lens of the daytime scope must be positioned at least
15 mm behind the front edge of the scope body. This
excludes mechanical contact of the NVS-33 night sight
attachment and daytime scope objective lens.
Last digits in the NC540 adapters part numbers correlate
with the diameter of the daytime riflescope. For example,
to use NVS33 with Swarovski Z6i 2-12x50 scope, you
should take the adapter NC540.50.
During shooting with the night vision riflescope
attachment NVS-33, which is attached to the daytime
riflescope with help of the adapter the adapter ring could
move along the objective lens of the daytime riflescope.
The size of this movement depends on the tightening
force of the adapter screw (5), recoil force of weapon,
etc., and could be equal to 1 mm on each shot. This
movement is allowed and do not affect on the impact
point. However, the position of the adapter should be
controlled after each shot in the shooting process.