Filter
Top Products
10.2. Maintenance Service Types and Intervals.
10.2.1. While in use, the range finder is subject to the
following types of maintenance services:
- Check inspection;
- Daily (routine) service;
- In-service maintenance.
10.2.2. The same servicing intervals are established for
the component parts and the entire range finder.
Check inspection is carried out before using the range
finder.
Daily servicing is performed after use. If the range finder
is out of operation the servicing within daily scope may be
abridged to biweekly visual inspection of the dehydrator
condition and, if need be, replacement of the silica gel and
charging of the rechargeable battery.
In-service maintenance is performed every six months
and before placing the range finder in short-term storage.
10.3. Check Inspection.
10.3.1. During the check inspection is ascertained the
serviceable condition of the range finder as directed in Steps 1
through 7 in Table 10.1.
10.3.2. The check inspection scope is outlined in Table
10.1.
Table 10.1
Operations Procedure as
per
Materials, tools and
accessories
1. Cleaning external
optical surfaces
(when so required)
2.Charging of
rechargeable
battery (when so
required)
Para.
11.6.2
Section 16
Lens Brush KXOOK No. 7
(made from synthetic fibre)
Absorbent optical cotton
Alcohol
Ether
10.4. Daily Servicing.
10.4.1. During the daily servicing, the range finder is
checked for serviceable condition in accordance with Steps 1
through 10 of Table 10.1.
10.4.2. For the daily servicing scope see Table 10.2.