Filter
Top Products
20
6. TROUBLESHOOTING
The LED indicator is off when switch is ON.
Turn the switch on again. If LAM still does not go ON
check that battery is installed properly and has sufficient
charge. Replace battery if necessary.
Spot shape or size has changed
Emitter objective lens is dirty. Flush emitter lens with
fresh water and wipe it with soft cloth. If this doesn’t
help, send LAM for repair.
No radiation when activating LAM with remote switch
Turn the mode switch (13, Fig. 2) to OFF position and
then turn LAM ON again. If this doesn’t help, replace the
remote switch.
Radiation doesn’t stop when remote switch is released
Replace the remote switch.
Moisture in the battery compartment.
Check the O-ring on the battery compartment cover and
replace it if necessary. If the battery compartment cover is
damaged, send LAM for repair
Shift of zero line when firing
Send LAM for repair.