Filter
Top Products
17
If LAM was exposed to salt water it should be rinsed in
fresh water and dried outside at no more than 55
o
C.
Long-term storage
When preparing for long-term storage, cover the external
metal surfaces of LAM with protective lubricant. Each 4
(four) years old layer of lubricant should be removed and
new layer be applied.
To remove old layer of lubricant:
- Wipe LAM with clean dry cloth,
- Degrease metal surfaces of LAM with benzene
moistened cloth,
- Dry LAM out-of-doors.
Do not touch unit’s metal surfaces with fingers after
cleaning.
To apply new layer of lubricant:
- Within two hours from the cleaning apply an
even 0.2-0.5 mm thick layer of lubricant on
metal surfaces with a brush.
- Do not cover plastic parts.