Filter
Top Products
6
OFF
LAM is off
R
Visible aimer is on
P
IR aimer is on
IL
Illuminator is on
ILP
Both IR aimer and Illuminator are
on
BT
Battery test
The LED (14, Fig. 2) in BT mode indicates battery level:
solid red LED means the battery charge is normal, if it is
blinking - the battery must be replaced.
IR channels of LAM can operate at high (H mode) and
low (L mode) power levels of laser. Low mode or IR
channels are used for training purposes. Appropriate level
can be chosen with switch (15, Fig. 2). Red channel is
switched into the training mode by means of removable
filter.
To prevent unintentional switching to high power mode,
switch (15, Fig. 2) is blocked with the ring (12, Fig. 2).
To unblock the switch and allow high power mode (H)
the ring must be pulled out and turned.