Filter
Top Products
7
DECK RE-WAXING PROCEDURE
Frequency: Every 1 month
Parts name: Silicon oil set
Parts number: SZTM74SOS
Price (USD): 0.6
Use time : 1
Procedure:
1. Loosen the tension bolts at both ends.
2. Pull the belt with your left hand and apply the silicon in the deck with
your right hand. (The volume of silicon applied is about 40ml)
3. Tighten the tension bolts.
4. Start the treadmill. Step on the treadmill belt to walk the silicon in.
Adjust the belt tension if necessary.
5. With the clamp-on meter, measure the current draw of the motor.
(Clamp on either the red or the black wire.) The current should be less
than 15Amps for 110V model. (less than 7.5Amps for 220V model.)
Caution:
If deck is not to periodical add the waxing, between the deck and running belt will
produce great friction make the deck and running belt to burn up and cut down the
motor life .