Filter
Top Products
22
To Store up the parameter SELECT
Decrease this show parameter of speedSLOW
Add this show parameter of speedFAST
To scroll through the list of setting DOWN
To scroll through the list of setting UP
KEY BEHALE FUNCTION
T9800 OPERATION MANUAL- Engineer mode
1. Press & Hold both “ELEVATION
” and “SPEED ” at the same time
for 5 sec. Then, the display will show
“Engineering Mode ”.
Set the data/function Step.
Use the elevation arrow keys to scroll through the available functions press
“SELECT” key enter, press the “SPEED” key to choose the data press
“SELECT” key to save the data/function.
To exit, press “STOP” key
2. Press the "ELEVATION UP or
DOWN" to select you want and press the
“SELECT" key enter.