Filter
Top Products
9
1.2 SETUP
Read the Operation Manual before setting up the Life Fitness treadmill. Place the treadmill where it will be used
before beginning the setup procedure.
1.2.1 ELECTRICAL POWER REQUIREMENTS
The Life Fitness treadmill is intended for use on a normal 120-Volt electrical circuit in the U.S. and Canada. The
following table provides the current rating for this product based on supply voltage. Make sure this model supports
the proper line voltage for your location before plugging the product into the receptacle.
Supply Voltage
(VAC)
Frequency (Hz) Maximum Current
(Amps)
100 50 / 60 14.4
120 50 / 60 12
200 50 / 60 7.2
220 50 / 60 6.5
230 50 / 60 6.3
240+ 50 / 60 6.0
1.2.2 GROUNDING INSTRUCTIONS
This Life Fitness product must be properly grounded. If the unit malfunctions or breaks down, proper grounding
provides a path of least resistance for the electric current, which reduces the risk of shock to anyone touching or
using the equipment. Each unit is equipped with an electrical cord, which includes an equipment grounding
conductor and a grounding plug. The plug must be inserted into an outlet that has been properly installed and
grounded in accordance with all local codes and ordinances.
A temporary adapter MUST NOT BE USED to connect this plug to a 2-pole receptacle in North America. If a
properly grounded, 12 AMP outlet is not available, a qualified electrician must install one.
DANGER: A risk of electrical shock may result from improper connection of the equipment-grounding
conductor. Check with a qualified electrician if in doubt about proper grounding technique. DO NOT modify the
plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a qualified
electrician.
DANGER : Tout branchement incorrect du conducteur de mise à la terre de l’appareil peut causer un
risque de décharge électrique. Consulter un électricien qualifié en cas de doute sur la technique de mise à la
masse. NE PAS modifier la fiche de l’appareil. Si elle ne s’adapte pas sur une prise électrique, faire installer
une prise correcte par un électricien qualifié.