Filter
Top Products
26
5 USER MENU
5.1 OVERVIEW
The T3i/T5i Consumer treadmills have a User Menu to vary specific attributes of the treadmill. Below are
instructions on how to enter and use the menu.
5.2 ENTERING USER MENU
To enter the User Menu, press the Stop Key twice, and then hold down the Enter Key. The unit will go through a
warm reset and beep 3 times. Alternately hold down the Enter Key, and turn the treadmill on. The message "USER
MENU" will appear. After about 1 second the Console will automatically enter the first Menu Item.
Use the Enter Key to move forward through the Menu Items. Use the Stop Key to move backwards. When in the
last mode, you must move backwards to get to the other items.
There are two ways to exit the menu: Turn off the treadmill (all settings will be saved). Or keep pressing the Stop
Key to move all the way back to the beginning of the menu.
To see how to change settings in the menu, refer to the specific Menu Item below.
5.3 DESCRIPTION OF USER MENU ITEMS
5.3.1 USER STATISTICS
The User Statistics mode is used to display the current accumulated statistics of up to 4 different users. Select the
user’s name using the Up/Down Arrow Keys and/or My Workout Key. Press Enter. Use the Up/Down Arrow Keys to
move through the data items. If any data item is over the listed maximum you will see dashes in the display "----".
These Statistics can be cleared to zero as follows: Press the Speed Up Arrow Key. The display will indicate
"PRESS SPEED DOWN ARROW KEY TO CLEAR STATS". Press the Speed Down Arrow Key. The stats will be
cleared and the message "STATS CLEAR" will be displayed. If you press any other key after pressing the Speed
Up Arrow, it will cancel the clearing of the stats. Then, you must re-activate the clearing process by pressing the
Speed Up Arrow Key again.
5.3.2 SETTINGS
There are 3 Settings that can be adjusted and saved: Pause Time, Sleep Time, and Units. You can cycle through
the settings using the Up/Down Arrow Keys. Use the Time Arrows to adjust the settings. Any adjustments are
automatically saved. You can revert a setting back to its default value by pressing the Cool Down Key
5.3.3 SOFTWARE VERSION NUMBERS
SOFTWARE VERSION shows the current software version for the Console, and for the Motor Controller. Use the
Up/Down Arrow Keys to toggle between them. The Console Software Version Number is displayed as "CONSOLE
VER=XX.X' where xx.x is the version number. For the Motor Controller the message "MOTOR VER = XX.X" is
displayed.