Life Fitness LCD Entertainment Ready Home Gym User Manual


 
MODELS NEW 95C UPRIGHT LIFECYCLE
®
EXERCISE BIKES
TOOLS REQUIRED: Phillips Screwdriver, Metric Allen Set, M16 & M17 Wrench
PARTS
NOT USED FROM KIT: (1) Main Bracket Cap, (1) Grommet
1. Remove the protective liner from one of the provided FASTENER
STRIPS. Attach the fastener strip to the bottom of the POWER BLOCK (--
). Interlock the remaining FASTENER STRIP to the installed FASTENER
STRIP. Remove the remaining protective liner from FASTENER STRIP
and secure the POWER BLOCK to the underside of the CENTER
FRAME as shown.
Connect the screw-type connector of the POWER CORD (--) to the
underside receptacle. Bundle excess POWER CORD and store under
the unit. Connect the COAXIAL CABLE (r) to the broadcast supply
receptacle in similar fashion.
2. Connect the POWER SUPPLY CORD to the POWER ADAPTER (o).
3. Attach the TV BRACKET (with bent tab) (--) to the MAIN BRACKET (--)
as shown using four SCREWS (--) and WASHERS (--). Tighten the
SCREWS securely. (8-10 ft. lbs.)
4. Remove the six SCREWS (--) securing the REAR CONSOLE COVER (10)
to the FRAME. Remove the REAR CONSOLE COVER.
Remove the four SCREWS securing the INSERT (--) as shown.
Set the REAR CONSOLE COVER aside.
5. Carefully pull the MEDIA CABLE BUNDLE (--) (POWER and
COAXIAL) from inside the CONSOLE BRIDGE (--). Un-bundle
and straighten the MEDIA CABLES.
Install the COAXIAL EXTENSION COUPLER and COAXIAL
EXTENSION CABLE.
Achieve Console Units Only:
6. Remove the two SCREWS (--) securing the BOTTOM INSERT (--
) and remove the insert. Do not discard the SCREWS.
7. Locate the REMOTE CONTROL (--) and REMOTE BRACKET (--). Feed the REMOTE
CABLE (--) through the large access hole in the REMOTE BRACKET (--). With the
REMOTE CONTROL (--) and REMOTE BRACKET (--) oriented as shown, secure them
together using one SCREW. Tighten the SCREW securely.
8. Carefully feed the REMOTE CABLE (--) through the opening in the bottom of the
CONSOLE (--) and through the back of the CONSOLE. Position the REMOTE
BRACKET (--) into position replacing the BOTTOM INSERT (--). Secure
the REMOTE BRACKET using the previously removed SCREWS.
11
J
J
J
J J
8
6
5
4
A
A
A
A
A
A