Filter
Top Products
Position the console bridge (5) near the top of the uprights. Attach the wire connectors leading from the left upright and
the console bridge. Be sure the connectors are fully seated together. Feed any excess wire into the hollow inside the left
upright.
CAUTION: Do not pinch the wire when attaching the left upright to the console bridge.
Attach the console bridge to the uprights using six M8 x 15mm zinc bolts (9) and six star washers (3), three for each
upright. Leave the bolts finger-tight at this time.
Attach one handlebar extension (7) on each side of the console bridge, using two black M8 x 15mm (8) bolts and two
star washers (3) each.
13
9
9