Filter
Top Products
2 ASSEMBLY
For safety, and to save time and effort, read these setup instructions and the Operation Manual completely before
installing your Life Fitness Treadmill. Place the treadmill near where it will be used before beginning the unpacking
procedure.
2.1 UNPACKING
These unpacking instructions assume you have already done the following:
• Removed the top of the shipping carton.
• Removed the styrofoam packing material.
• Removed these assembly instructions from the bridge assembly carton.
The best method for unpacking the rest of the treadmill is as follows:
• Remove the bridge assembly carton from the base unit.
• Break down the sides of the inner shipping carton.
• Remove the treadmill uprights from the shipping carton.
• Assemble the treadmill. Once assembly is complete:
- Fold the treadmill upward until it locks in its upright position.
- Roll the treadmill off the shipping carton and to the location where it will be used.
WARNING: Fold the treadmill into the upright and locked position before rolling it over on its side or picking it up from
the floor. The base or folding frame can swing around unexpectedly if this procedure is not followed.
10