Filter
Top Products
9
18. SECURELY assemble the CAM SHROUD (40) to the CAM FRAME (B)
using two 3/8 X 89mm BOLTS (41), four 3/8" SAE WASHERS (3), four
3/8" RH WASHERS (4), two 3/8" LOW HT LOCK NUTS (5) and four RH
CAPS (7) as shown.
19. SHROUD ASSEMBLY
SECURELY assemble the FRONT SHROUD (42) and the REAR SHROUD
(43) to the TOWER (A) using ten 3/8 X 90mm BUTTON HEAD BOLTS
(44), twenty 3/8" FLAT BLK WASHERS (22) and ten 3/8" ACORN NUTS
(45) as shown.
SECURELY assemble the TOWER CAP (46) to the TOWER (A) using two
3/8 X 25mm BUTTON HEAD BOLTS (47) and two 3/8" FLAT BLK WASH-
ERS (22).