Filter
Top Products
33
6 SERVICE AND TECHNICAL DATA
6.1 PREVENTATIVE
MAINTENANCE TIPS
The Life Fitness stairclimber is backed by the engineering excellence of Life Fitness and is one
of the most rugged and trouble-free pieces of exercise equipment on the market today.
Commercial Life Fitness products have proven to be durable in health clubs, colleges, military
facilities, and other locations the world over. This same technology, engineering expertise, and
reliability have gone into the Life Fitness stairclimber.
NOTE: The safety of the equipment can be maintained only if the equipment is examined regu-
larly for damage or wear. If maintenance is required, keep the equipment out of use until defec-
tive parts are repaired or replaced. Pay special attention to parts that are subject to wear as out-
lined in the Preventive Maintenance Schedule. See Section 6.1.
REMARQUE : pour conserver un matériel sûr, il convient de l'inspecter régulièrement afin de
déceler tout signe d'usure ou d'endommagement. N'utilisez pas l'appareil tant que les pièces
défectueuses n'ont pas été réparées ou remplacées. Portez une attention toute particulière aux
pièces qui s'usent, comme indiqué ci-dessous.
The following preventive maintenance tips will keep the Life Fitness stairclimber operating at
peak performance:
• Locate the Life Fitness stairclimber in a cool, dry place.
• Clean the top surface of the pedals regularly.
• Keep the display console free of fingerprints and salt build-up caused by sweat.
• Use a 100% cotton cloth, lightly moistened with water and mild liquid cleaning product,
to clean the Life Fitness stairclimber. Other fabrics, including paper towels, may scratch
the surface. Do not use ammonia or acid-based cleaners.
• Long fingernails may damage or scratch the surface of the console; use the pad of the
finger to press the selection buttons on the console.
• Clean the housing thoroughly on a regular basis.
NOTE: A non-abrasive cleaner and soft cotton cloth are strongly recommended for cleaning the
exterior of the unit. At no time should cleaner be applied directly to any part of the equipment;
apply the non-abrasive cleaner on a soft cloth, and then wipe the unit.