Filter
Top Products
STEP 9:
8
0
1
2
345
6
1/2 1/2 1/2 1/2 1/2 1/2
• SECURELY assemble two 3/8” SPRING PINS (47) to the PAD SLEEVES (6) as shown in FIGURE 9.
• Assemble four ROLLER PADS (4) to the PAD SLEEVES (6) using four PLASTIC WASHERS (24) and four STARLOCK
COLLARS (49).
• Slide PAD SLEEVES (6) over LEG PEDESTAL (9) until the spring pin pops into the holes. See FIGURE 9.
• SECURELY assemble two 3/8 X 1” BUTTON HEAD CAP SCREWS (39) and two 3/8” LOCK NUTS (44) to the last holes in the
LEG PEDESTAL as shown in FIGURE 9.
• Insert two 3 X 2” END CAPS (30) into the ends of the LEG PEDESTAL (9) as shown in FIGURE 9.
FIGURE 8
STEP 8:
• Attach LEG PEDESTAL (9) to the BENCH FRAME
(7) using two 3/8 X 1” BUTTON HEAD CAP
SCREWS (39) and two 3/8” LOCKWASHERS (42)
as shown in FIGURE 8.
(NOTE: Both button head cap screws must be
tightened at the same time using two allen
wrenches.)
3/8 X 1” BTN HEAD 39
7
FIGURE 9
6
30
4
24
49
44
39 3/8 X 1” BTN HD
9
47
9
42