Filter
Top Products
FIGURE 14
11
STEP 14:
• SECURELY assemble the CABLE (23) to the cam on the LEG PEDESTAL (9) using one 3/8 X 1” BOLT (38), one 3/8”
WASHER (41), and one 3/8” LOCK NUT (44). See FIGURE 14.
• Attach two 1 X 1” GLIDES (29) to the LEFT & RIGHT PAD SUPPORTS (12) (13) approximately where shown in FIGURE 14.
• Insert threaded end of CABLE (23) through slot of the BENCH FRAME (7) and around LEG CURL/EXTENSION (9) as shown
in FIGURE 14.
7
29
23
41
44
3/8 X 1” 38
9