Filter
Top Products
0
1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
7
STEP 4
FIGURE 4
• LOOSELY assemble the two SWIVEL UPRIGHTS (7)
to the LOWER PULLEY HOUSING (6) using four 1/2
X 3-1/4” BOLTS (36), four 1/2” WASHERS (27), and
four 1/2” LOCK NUTS (29) as shown in FIGURE 4.
36 1/2 X 3-1/4”
• Pull back the SPRING PINS on the SWIVEL HOLDERS
(5) and slide assemblies over the SWIVEL UPRIGHTS
(7) as shown in FIGURE 4.
7
29
29
27
7
5
5
6
6
• LOOSELY assemble the SWIVEL UPRIGHTS (7) to
the UPPER PULLEY HOUSING (8) using two 1/2 X
5” BOLTS (38), four 1/2” WASHERS (27), and two 1/
2” LOCK NUTS (29) as shown in FIGURE 4.
38
1/2 X 5”
29
8
27
29
8
38
1/2 X 5”
27
36 1/2 X 3-1/4”
27
• SECURELY assemble all loose connections made to
this point.