Filter
Top Products
10
FIGURE 7 FIGURE 8
• SECURELY assembly the CENTER PULLEY
BRACKETS (3) to the WEIGHT STACK SHAFTS
(16) using one 1/2 X 1-1/4 BOLT (35) as shown in
FIGURE 7.
STEP 7:
• Slide HEAD PLATES (17) up the WEIGHT STACK
SHAFTS (16) and SECURELY assemble the CEN-
TER PULLEY BRACKETS (3) to the HEAD
PLATES (17) using two 3/8 X 1-1/4” BOLTS (32) and
two 3/8” WASHERS (26) as shown in FIGURE 8.
STEP 8:
35 1/2 X 1-1/4”
3
32 3/8 X 1-1/4”
16
26
17 31
FIGURE 9
STEP 9:
• Snap two WEIGHT PLATE BUSHINGS (23) each,
into the top side of the forty WEIGHT PLATES (41)
as shown in FIGURE 9.
49
3
16