Filter
Top Products
FIGURE 17
17
• SECURELY assemble the SHROUD (11) to the TOWER (1) using four 3/8 X 1” BUTTON HEAD CAP SCREWS (31) as shown in FIGURE 17.
STEP 17:
0 1 2 3 4 5 6
1/2 1/2 1/2 1/2 1/2 1/2
• Repeat STEP 17 to assemble SHROUD on other side of the CABLE CROSS OVER.
11
1
MAKE SURE
CABLE IS
ROUTED
BEHIND
SHROUD!
3/8 X 1” 31
BUTTON
HEAD