Filter
Top Products
14
FIGURE 13
• Loop the threaded end of the CABLE (18) around a 4-1/
2” PULLEY (13) and SECURELY assemble the 4-1/2”
PULLEY (13) to the UPPER PULLEY HOUSING (8)
using one 3/8 X 2-3/4” BOLT (34), two 3/8” FLANGE
SPACERS (20), and two 3/8” LOCK NUTS (28). See
FIGURE 13.
STEP 13:
8
18
13
• Slide the 13/16” SHAFT COLLARS (42) to the top of
the GUIDE RODS (10) and SECURELY tighten the set
screws of the SHAFT COLLARS (42). See FIGURE 13.
34 3/8 X 2-3/4”
20
28
42