Filter
Top Products
9
www.keystness.com
SCREW ST4.2*13
PHILLIPS SCREW M6*30
PHILLIPS SCREW M6*20
WASHER 6.6* 12*1.6mm
ASSEMBLY FOR FENDERS
Step 1:
Lift up the base of the treadmill until the
pop pin located on the left side engages.
Step 2:
On the outer part of the fenders, secure the
right and left fenders with 2 phillips screws
M6*30 and 2 flat washers M6*12*1.6 mm.
Step 3:
On the inner part of the fender secure the
right and left fenders with 2 phillips screws
M6*20 and 2 flat washers M6*12*1.6.
4
LEFT FENDER
RIGHT FENDER
CONSOLE
SAFETY KEY
TOOL
6MM
MAIN FRAME
FENDER
SCREW/MISC
END CAP LEFT
END CAP RIGHT
ALLEN BOLTS M8*55
WASHER 9* 16* 1.6MM
ALLEN BOLTS
M8*15*15
PHILLIPS SCREW M6*30
WASHER 6.6* 12* 1.6MM
PHILLIPS SCREW M6*20
PHILLIPS SCREW ST4.2*16
WASHER 11* 20*2MM
PHILLIPS SCREW ST4.2*13
Assembly
ASSEMBLY FOR END CAPS
In the treadmill’s folded position, secure
the end caps with screws ST 4.2*13 (Qty
4).