Filter
Top Products
8
Assembly
Figure 5
Connect 7 Pin, 3 Pin and grounding cables.
Refer To Figure 5 and 5a.
Attach console to console tube using four
M5*12mm phillips head screws.
Note: Ensure that all wires are secure
inside console. Be careful not to pinch wires.
7 PIN
CONNECTOR
Figure 4
Attach console tube to main frame. Slide
tube down into main frame. Secure using
three M8*50mm hex head bolts. Cable
should extend through bottom and top of
console tube.
Figure 4
3 PIN
CONNECTOR
CONSOLE
CABLES
7 PIN
CONNECTOR
3 PIN
CONNECTOR
2 GROUND
CONNECTORS
Figure 5a
Figure 5
GROUNDING
TERMINALS
M8*50mm HEX BOLT