Filter
Top Products
6
Getting Started - The CardioZone E-CZ400 Elliptical will require some assembly. Unpack the
box in a clear area. Remove packing material. Do not dispose of packing material until assem-
bly is complete and unit is working properly. Place the unit on a clean level surface for assem-
bly. Make sure there is easy access to an electrical outlet. Before assembling the unit should
be placed as close as possible to its final location. Tools have been provided for use while
assembling this product.
Assembly Parts
1. Owner’s Manual
2. Linkage
3. Left and Right Handlebars
4. Console
5. Console Cable
6. Console Mast
7. Rear Cover
8. M8*50mm Hex Bolt - Qty 3
9. M8*12mm Hex Bolt - Qty 4
10. M8*20mm Hex Bolt - Qty 6
11. M5*12mm Screw - Qty 9
Assembly
Figure 1
Lift pedal and place left linkage onto sleeve
and align holes. Secure linkage to unit
using four M8*12 mm hex bolts.
Note: Left linkage will be wrapped in plas-
tic. Right linkage will already be secured to
the sleeve.
LINKAGE
SLEEVE
M8*12MM HEX BOLT