Filter
Top Products
8
Assembly
Figure 6
CONSOLE
MAIN WIRE HARNESS
650MM
Figure 6
Step 1:
Locate console and remove
the four screws that are already
installed on the back.
Step 2:
Connect the main wire harness
and pulse wire coming from the
console tube to the wires coming
from the console.
Step 3:
Secure console to console tube
using the four screws that were
removed in Step 1.
Figure 5
CONSOLE TUBE COVER
M5X0.8-12MM SCREW
Figure 5
Step 1:
Slide the console tube
cover down until it is resting
on the main frame. Secure the
console tube cover to the main
frame using four M5x0.8-12mm
screws.