Filter
Top Products
7
Assembly
M8 SPRING WASHER
Figure 4
MAIN WIRE HARNESS
900MM
CONSOLE TUBE
MAIN WIRE HARNESS
650MM
CONSOLE TUBE COVER
Figure 4
Step 1:
Locate console tube and
console tube cover. Slide con-
sole tube cover up to the console
tube. With the bottle holder of
the console tube cover facing the
user, insert console tube into
the console tube cover.
Step 2:
Connect the main wire harness
from the console tube to the main
wire harness coming from the
main frame.
Step 3:
Secure console tube to the
main frame using one M8x1.25-
95 screw and one 8x16-3.5
washer. Note: Steps 1 - 3 must
be completed before moving on to
Step 4.
Step 4:
Install four M8x1.25-55 screws
and four M8 spring washers
through the side of the console
tube. Note: Be careful not to
pinch Main Wire Harness when
installing Console Tube.
M8X1.25-95 SCREW
M8X1.25-55 SCREW
8x16-3.5 WASHER
Note:
Must Be
installed
rst. See
Step 3 for
details.
RIGHT HANDLEBAR
LEFT HANDLEBAR
M5X0.8-12MM SCREW
COVER
M8X1.25-16
SCREW
Figure 3
Step 1:
Secure left handlebar to main
frame using four M8x 1.25-16
screws. Attach the cover over
the handlebar and secure using
two M5x0.8-12mm screws.
Figure 3