Filter
Top Products
12
Console Instructions
WATT:
Displays current training watt figures. A watt is a measurement of the amount of power gener-
ated by the user based on the resistance and speed.
RECOVERY:
After your workout, keep holding on hand grips and press “RECOVERY” button. All function dis-
play will stop except “TIME” starts counting down from 01:00 to 00:00. Screen will display
your heart rate recovery status rating between F1-F6. F1 is the best, F6 is the worst. User may
keep exercising to improve the heart rate recovery status. (Press the RECOVERY button again
to return the main display.)
CALENDAR:
Screen will display year/month/day in sleep mode. When the unit is plugged in the console will
prompt user to input correct information. Use the UP and DOWN button until correct year is
found. Press MODE to confirm selection. Repeat steps to input correct month and day.
Note: All information will be saved until unit is unplugged.
CLOCK:
Screen will display time in sleep mode. Once the calendar is set, you will be able to input the
correct time. Use the UP and DOWN buttons until the correct hour is found. Press MODE to con-
firm selection. Repeat steps to input correct minutes. Note: All information will be saved until
unit is unplugged.
TEMPERATURE:
Screen will display room temperature in sleep mode.
GENERAL INFORMATION:
1. Start Pedaling or press any button to start Console.
2. The Console will shut down after 4 minutes of no activity, and will display room temperature.
3. To Reset Console press and hold the START/STOP button for 2 seconds.
Note: The values calculated or measured by the console are for exercise purposes only, not for
medical purposes.
GETTING STARTED:
Press MODE to enter USER SELECT. Use the UP/DOWN to select a User. Press MODE to select
a User. Press the UP/DOWN key to select HEIGHT. Press MODE to confirm the value. Use
the UP/DOWN key to select WEIGHT. Press MODE to confirm value. Use the UP/DOWN key to
select AGE. Press MODE to confirm value. Use the UP/DOWN key to select GENDER. Press
MODE to confirm value. Press START/STOP to enter program mode.
PROGRAM INSTRUCTIONS:
MANUAL PROGRAM:
Allows the User to manually adjust tension settings throughout their workout. The default
tension level is 6. You may set Time or Distance for your workout.