Filter
Top Products
Assembly
9
5. First, Connect the Upper Electronic
Wire(70) to the Lower Electronic
Wire(71). Next, slide the Console
Tube(40) onto the Main Frame(1) mak-
ing sure not to cut the wire. Last, secure
the Console Tube(40) to the Main
Frame(1) using four Washers(5) and four
Screws(30).
6. Pull the Upper Electronic Wire(70)
through the large hole at the top of the
Handlebars(63). Fasten the
Handlebars(63) to the Console Tube(40)
using four Washers(39) and four
Screws(64).
Figure 5
Figure 6