Filter
Top Products
Moving Instructions
CAUTION! TO REDUCE THE POSSIBILITY OF INJURY WHILE LIFTING, BEND YOUR LEGS AND
KEEP YOUR BACK STRAIGHT. AS YOU LEAN THE UNIT, LIFT USING YOUR LEGS, NOT YOUR
BACK.
First, grasp the console tube and place one foot on the base as shown in Figure 1. Next, with a firm
grasp on console tube, place one foot on the center of the base of the mainframe and carefully tilt the unit back
until it rolls freely on the transport wheels. Using extreme caution, move the unit to the desired location as
shown in Figure 2. To set the unit down, place one foot on the center of the base of the mainframe and care-
fully lower unit onto base in a resting position. Do not attempt to move the unit over an uneven or rough sur-
face. Note: The unit pictured may not be the same as the one you purchased.
19
Figure 1
Figure 2