Filter
Top Products
Assembly
10
7. First, connect Upper Electronic
Wire(70) to the back of the Console(67).
Next, clip the Pulse Wires(69) to the two
pulse wires coming from the Console(67).
Last, secure the Console(67) to the
Handlebars(63) using four Screws(68).
Note: The four Screws(68) will already be
installed in the back of the Console(67)
when you remove it from the box.
Congratulations: You have completed
the assembly of your new CardioMax
700u Upright bike.
Figure 7
INSERT THE AC ADAPTER
INTO LOWER RIGHT
HAND SIDE OF THE BIKE.