Filter
Top Products
Assembly
9
5. First, Seat Frame(40) onto the Rail
Tube(13), pull the Pulse Wires(52) in the
Seat Frame(40) and Pulse Wires(53) in
the Rail Tube(13) out of the square on the
bottom of the Seat Frame(40). Next,
connect the Pulse Wires(52) to Pulse
Wires(53) as shown in Figure 5. After
the pulse wires are connected place them
inside the square in the bottom of the
Seat Frame(40). Secure the iron plate
with four Screws(51). Last, adjust the
Seat Frame(40) at the desired position
and fix it with the Locking Knob(46).
6. Place the Rail Tube(13) on to the
Main Frame(1) and secure in place with
four Screws(12) and four Washers(10).
Figure 5
Figure 6