Filter
Top Products
Assembly
8
4. Install Back Cushion(44) onto the Seat
Frame(40) with four Hex Head
Screws(48) and four Washers(49). Next,
install Seat(45) onto the Seat Frame(40)
using four Hex Head Screws(48) and four
Washers(49).
Figure 4
3. First, thread the Right Pedal(34) into the
Right Crank Arm(30). Tighten the pedal
securely using the wrench that has been
provided. Next, find the Pedal Strap
marked “R” and snap one of the 3 hole
ends onto the inside of the pedal then snap
the other 3 holed end onto the outside of
the pedal. Repeat step to install the Left
Pedal(33) into Left Crank(29).
Note: The Left Pedal(33) is reverse
threaded. You will turn the pedal counter
clock-wise to thread it into the Left Crank
Arm(29).
Figure 3