Filter
Top Products
Assembly
10
7. First, insert the Console Tube Cover(83) onto
the Console Tube(35). Next, connect the Upper
Electronic Wire(56) and the Lower Electronic
Wire(57). Connect the Pulse Wires(54) to Pulse
Wires(55). Last slide the Console Tube(35) onto
the Main Frame(1) and secure in place using
three Washers(18) and three Screws(12).
8. Plug the Upper Electronic Wire(56) into the
back of the Console(36). Then, plug the Pulse
Wires(55) with the pulse wires coming from the
Console(36). After the wires are connected
slide the Console(36) onto the Console Tube(35)
and fix in place with four Screws(37).
Note: The four Screws(37) will already be
installed in the back of the Console(36) when
you remove it from the box.
Congratulations: You have completed the
assembly of your new CardioMax 700r
Recumbent bike.
Figure 7
INSERT THE AC
ADAPTER INTO FRONT
LOWER RIGHT HAND
SIDE OF BIKE.