Filter
Top Products
Assembly
7
1. Attach the Front Stabilizer(20) to the
Main Frame(1) with two Carriage
Bolts(76), two Arc Washers(18), and two
Cap Nuts(19).
2. First, attach the Rear Stabilizer(15) to the
Rear Support Tube(47) with two Carriage
Bolts(17), two Arc Washers(18), and two
Cap Nuts(19). Connect the Rail Tube(13)
with the Rear Support Tube(47) with four
Screws(12) and four Washers(10).
Figure 2
Figure 1
INSTRUCTIONS FOR ASSEMBLY:
Unpack the box in a clear area. Check to make sure all components are present and in good condition.
Do not dispose of the packing material until the assembly is completed. Tools have been provided for
you to use when assembling the product. If you need assistance please go to our website at
www.keysfitness.com or call 1 888-340-0482.