Filter
Top Products
Figure 9
Locate bag labeled Figure 9. Connect
the Pulse Wires coming from the Pulse
Handlebar Assembly to the Pulse Wires
from the Console. Secure Pulse Handlebar
Assembly to Console Tube using six M6*10
Hex Socket Head Bolts.
Note: Ensure that all wires are secure
inside console tube. Be careful not to pinch
wires.
Figure 9
Figure 8
Locate Console. Connect Upper Console
Wire and Pulse Wires to the appropriate
location on the back of the Console. Secure
Console to Console Tube using four Screws.
Note: The four Console Screws will already
be installed into the back of Console when
you remove it from the box.
Figure 8
9
Assembly
M6*10 HEX SOCKET BOLT
PULSE HANDLEBAR ASSEMBLY
PULSE WIRE