Filter
Top Products
6
Assembly
Figure 2
Locate Bag labeled Figure 2. Locate Cover.
Secure Cover to Main Frame by using three
M5*0.8-12 Screws on the left side of unit.
Repeat for the right side.
Figure 2
Figure 3
Locate Bag labeled Figure 3. Locate Left
and Right Handrail Assemblies. Secure
Left Handrail Assembly to Console tube by
using one Washer, one Spring Washer, one
M10*20 Hex Bolt, and one End Cap. Repeat
for the right side.
Note: The Handrail Assembly will only
go onto the Console Tube one way. The
connector on the middle of the Handrail
Assembly will face outwards.
Figure 3
M5*0.8-12 SCREW
END CAP
M10*20, HEX BOLT
SPRING WASHER
WASHER
CONSOLE TUBE
HANDRAIL ASSEMBLY
CONSOLE TUBE
COVER