Filter
Top Products
During non-heart rate programs, the profile window will toggle between the program
profile and the track display. Profile will show for 10 seconds, Track for 30 seconds.
During heart rate programs, the profile window will only show the track.
The User may change the program selection during an exercise session by pressing the
PROGRAM button until new program is selected. The new selected program will start
from the beginning of the profile. All workout data will continue to add to previous
values. If you burned 150 calories during original program this value will not reset to 0.
Unit will automatically shut off after 4 minutes of inactivity. Press any button to bring the
console back to full functionality.
ERROR MESSAGES -
The message center will display “MOTOR ERROR” message whenever the brake motor
was unable to move to its target position within 2 seconds.
Each time the CG1 is powered on, the console will check the brake motor status. If the
brake motor does not reply, then the console will display the error message “MOTOR
ERROR” immediately and disable button operation until power is reset.
To clear this error message plug and unplug the unit.
TO CHANGE UNIT OF MEASURE FROM STANDARD TO METRIC -
Press the PAUSE/RESET button for 2 seconds. Use the +/- buttons to change unit of
measure. Press ENTER/SCAN to confirm setting.
Console Instructions
18