Filter
Top Products
Assembly
19
Step 10
Slide two Upholstered Roller Pads (42) onto Foam Frames (11 & 12) and secure using two Big Plugs (65).
Slide the Long Foam Tube (77) through the hole in Seat Pad Support (13). Slide two Plastic Washers (87)
onto each end of Long Foam Tube (77). Next, slide two Upholstered Roller Pads (42) onto each side of Long
Foam Tube (77) and secure using two Big Plugs (65).
Slide two Upholstered Roller Pads (42) onto the Leg Hold Frames (17 & 18) and secure using two Big
Plugs (65).
Figure 10