Filter
Top Products
Assembly
22
Step 13
Note: This step is only used if you do not have the Leg Press 2 attachment. Use the Cable Adapter (113) in
place of the pulley.
Note: Stretch all cables out completely and make sure all twisting is removed before installing.
Install Leg Press Cable Substitute (47) as detailed in Figure 13. Follow dotted lines to identify exact location
of pulleys.
You will need the following for installation:
Cable Adapter (113) - Qty. 1
Longer Pulley Spacer (55) - Qty. 2
Cable (47) - Qty. 1
Bolt (95) - Qty. 1
Washers (102) - Qty. 2
Nylon Locknut (104) - Qty. 1
Figure 13