Ironman Fitness INSPIRE Treadmill User Manual


 
Assembly
The Ironman INSPIRE Treadmill will require assembly before operating. After opening the box, remove any
packing material from the treadmill.
Do not throw away any packing materials until the unit is working properly.
Place the base on a clean, level surface. Make sure the electrical cord will easily reach an electrical outlet.
If at anytime you need assistance with assembly, call 888-559-8810.
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1. Allen Wrench- 3/16”
2. Allen Wrench- 7/32”
3. Philip Screwdriver
Main Components:
1. Owner’s Manual
2. Console Assembly
3. Left and Right Uprights
4. Left and Right Fender
5. Left and Right Bottom Handle Cover
6. Handle End Caps
7. Deck Assembly
8. Chest Strap
Hardware:
1. Washer 9*16*1.6 mm (Qty 10)
2. Spring Washer 8 mm (Qty 10)
3. Allen Bolt 5/16”-18 x 70 (Qty 2)
4. Allen Bolt 5/16”-18 x 15 (Qty 6)
5. Shoulder Allen Bolt 5/16”-18 x 45 (Qty 2)
6. Phillip Screw ST4.2*16 (Qty 6)
7. Phillip Flathead Screw ST4.2*16 (Qty 4)
Wire Connections:
1. Console Harness
2. EKG Harness
3. Incline Harness
4. Speed Harness
5