Filter
Top Products
Error Messages
26
Treadmill Error Messages.
Your treadmill is equipped with a software package that enables error messages to be displayed when there is
a problem. The following error codes will be displayed in the console display windows.
Safety Interlock Error
Messages
SI 1 - Safety key missing, replace and try again.
SI 2 - Over voltage protection trip. Notify Ironman Fitness Customer Service.
Other
Error
Messages
E11 - Lack of speed feedback data from belt motor. Attempt calibration. See Calibration Sequence section on
page 23 of this Owners Manual for detailed information.
E22 - Under Speed condition detected from the belt motor. Attempt calibration. See Calibration Sequence sec-
tion for detailed information.
E33 - Over Speed condition detected from the belt motor. Attempt calibration. See Calibration Sequence sec-
tion for detailed information.
E44 - Stuck key detected at power up, Notify Ironman Fitness Customer Service.
To avoid possible damage to the treadmill and the possibility of injury, do not operate the treadmill
until the problem is corrected. Call Ironman Fitness Customer Service at (800) 750-4766.